
Red Anti-rust Paint
500ml Spray - Satin Finish RED RAL 3000
ZG-90 zinc phosphate enhanced paints which prime and top-coat in one application. Provides a superior combination of good drying time, great coverage and solid opacity.
Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409:0). The paints are RAL matched for accurate and consistent colour reproduction with a longlasting satin finish.
Application:
General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.
Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.
Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972
The complete range with codes
Product Code | Manuf Code | Size |
CAN32811 | 1785 | 500ml Spray - SILVER BRIGHT FINISH |
CAN32813 | 1935 | 500ml Spray - Satin Finish BLACK RAL 9005 |
CAN32817 | 1936 | 500ml Spray - Satin Finish WHITE RAL 9010 |
CAN32814 | 1937 | 500ml Spray - Satin Finish GREEN RAL 6010 |
CAN32819 | 1938 | 500ml Spray - Satin Finish RED RAL 3000 |
CAN32818 | 1939 | 500ml Spray - Satin Finish BLUE RAL 5012 |
CAN32820 | 2045 | 500ml Spray - Satin Finish YELLOW RAL 1004 |
CAN33205 | 2018 | 900ml Tin - Silver |
CAN33206 | 2026 | 900ml Tin - Satin Finish Black RAL 9005 |
Key Features
- 2-in-1: Primer and Topcoat
- Effective protection against corrosion
- Excellent adhesion and flexibility for longterm performance (ISO 2409:0)
- Crossrail approval #CRL-MCR-004850
- Tested to ASTM B117 and DIN EN ISO12944-2
- RAL referenced colour matches available: Black, Red, Blue, Green, White, and Yellow
- Also available as ZG-90 Silver - see separate data Specifications Tab - Partcode 1785 and 2018
Application
General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.
Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.
Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972
Directions for use
- Use in well ventilated area.
- Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
- ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: Carefully stir the paint until solvent and solids are thoroughly mixed.
- Shake/stir periodically during application.
- Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
- Additional coats can be applied after 15 - 20 minutes.
- When finished: clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
- Do not use on the inside of water storage tanks.
- Remove prior to welding.
Technical Data:
Description | Spec |
APPEARANCE | Matched to RAL colour RED RAL 3000 |
ODOUR | Solvent |
MAXIMUM TEMPERATURE RESISTANCE OF CURED FILM | 80°C |
COATING THICKNESS (1-PASS, AEROSOL) | 30 µM |
MINIMUM APPLICATION TEMPERATURE (SUBSTRATE) | 10°C |
TOUCH DRY | 20 minutes |
HARD DRY | 6 hours |
SALT SPRAY RESISTANCE (ISO 12944, CATEGORY C3) | >220 hours |
PRODUCT SIZE | 500ml Aerosol |
MANUFACTURER CODE | 1938 |
Storage and Shelf Life
The aerosol product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.
The tin/bulk version may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. It should always be stored below 50°C, away from direct heat and naked flame.
Product Safety Data Sheets (SDS) - ZG-90 AEROSOL SILVER: | Download |
Product Safety Data Sheets (SDS) - ZG-90 AEROSOL COLOURS SATIN FINISH: | Download |
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING SILVER: | Download |
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING BLACK: | Download |
Product Technical Data Sheets (TDS) - ZG-90 SILVER: | Download |
Product Technical Data Sheets (TDS) - ZG-90 COLOURS: | Download |

Download the Product Leaflet: Download
- Stock: In Stock
- Cat No: CAN32819
- Weight: 0.50kg
- Dimensions: 76.00cm x 76.00cm x 76.00cm
- SKU: CAN32819
- UPC: 5012117994351