Menu
Your Cart
Stay informed! Visit the SA Department of Health's website for COVID-19 updates: www.sacoronavirus.co.za

ZG-90 BLACK 500ML BLACK GALVANISING ZINC PAINT COLD RAPID DRY

ZG-90 BLACK 500ML BLACK GALVANISING ZINC PAINT COLD RAPID DRY
New
ZG-90 BLACK 500ML BLACK GALVANISING ZINC PAINT COLD RAPID DRY
ZG-90 - Zinc Phosphate Enhanced Paints
Black Anti-rust Paint

500ml Spray - Satin Finish BLACK RAL 9005

ZG-90 zinc phosphate enhanced paints which prime and top-coat in one application. Provides a superior combination of good drying time, great coverage and solid opacity.

Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to ASTM B117) and adhesion (tested to ISO 2409:0). The paints are RAL matched for accurate and consistent colour reproduction with a longlasting satin finish.

Application:

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

The complete range with codes

Product Code Manuf Code Size
CAN32811 1785 500ml Spray - SILVER BRIGHT FINISH
CAN32813 1935 500ml Spray - Satin Finish BLACK RAL 9005
CAN32817 1936 500ml Spray - Satin Finish WHITE RAL 9010
CAN32814 1937 500ml Spray - Satin Finish GREEN RAL 6010
CAN32819 1938 500ml Spray - Satin Finish RED RAL 3000
CAN32818 1939 500ml Spray - Satin Finish BLUE RAL 5012
CAN32820 2045 500ml Spray - Satin Finish YELLOW RAL 1004
CAN33205 2018 900ml Tin - Silver
CAN33206 2026 900ml Tin - Satin Finish Black RAL 9005

Key Features

  • 2-in-1: Primer and Topcoat
  • Effective protection against corrosion
  • Excellent adhesion and flexibility for longterm performance (ISO 2409:0)
  • Crossrail approval #CRL-MCR-004850
  • Tested to ASTM B117 and DIN EN ISO12944-2
  • RAL referenced colour matches available: Black, Red, Blue, Green, White, and Yellow
  • Also available as ZG-90 Silver - see separate data Specifications Tab - Partcode 1785 and 2018
Application

General fabrication: Use on bare, degreased metal to provide an effective, colour-matched finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Complementary products: TF-90 for surface degreasing, MZ-90 for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848 MZ-90 / Parcode 1972

Directions for use
  • Use in well ventilated area.
  • Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
  • ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: Carefully stir the paint until solvent and solids are thoroughly mixed.
  • Shake/stir periodically during application.
  • Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
  • Additional coats can be applied after 15 - 20 minutes.
  • When finished: clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
  • Do not use on the inside of water storage tanks.
  • Remove prior to welding.

Technical Data:

Description Spec
APPEARANCE Matched to RAL colour Black (RAL 9005)
ODOUR Solvent
MAXIMUM TEMPERATURE RESISTANCE OF CURED FILM 80°C
COATING THICKNESS (1-PASS, AEROSOL) 30 µM
MINIMUM APPLICATION TEMPERATURE (SUBSTRATE) 10°C
TOUCH DRY 20 minutes
HARD DRY 6 hours
SALT SPRAY RESISTANCE (ISO 12944, CATEGORY C3) >220 hours
PRODUCT SIZE 500ml Aerosol
MANUFACTURER CODE 1935

Storage and Shelf Life

The aerosol product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.

The tin/bulk version may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. It should always be stored below 50°C, away from direct heat and naked flame.

ZG-90 Zinc Phosphate Enhanced Paints

Download the manual or user guide

Product Safety Data Sheets (SDS) - ZG-90 AEROSOL SILVER:  Download
Product Safety Data Sheets (SDS) - ZG-90 AEROSOL COLOURS SATIN FINISH: Download
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING SILVER: Download
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING BLACK: Download
Product Technical Data Sheets (TDS) - ZG-90 SILVER: Download
Product Technical Data Sheets (TDS) - ZG-90 COLOURS: Download

Download the Product Leaflet:    Download

Write a review

Note: HTML is not translated!
Bad Good
R 233.80
Ex Tax: R 203.30
  • Stock: In Stock
  • Cat No: CAN32813
  • Weight: 0.52kg
  • Dimensions: 240.00cm x 60.00cm x 60.00cm
  • SKU: CAN32813
  • UPC: 5012117992333
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.